We created a special version of the TATAMI TABLE using lightweight and durable dry carbon for the tabletop material. Compared to the aluminum composite panel used in the TATAMI TABLE, it boasts overwhelmingly superior strength. By leveraging its exceptionally tough material properties, we have made it lighter, more durable, and improved its heat resistance. The titanium legs, which open and close quickly and smoothly, are specially treated with a lapis lazuli-colored anodic oxidation process, and come standard equipped with anti-slip silicone tubing. Every aspect of it is of a premium specification. 【About Production and Handling Marks】 TATAMI is handcrafted in-house from the cutting of the tabletop material to finishing, assembly, operational adjustment and verification, and final inspection, with the exception of individual parts (corner parts, titanium legs). As a small garage manufacturer, mass production is not feasible. We pay close attention to the production process, but due to the nature of the manufacturing, handling marks and dirt are inevitable. Please be aware that there might be slight stains, scratches, and dents remaining on the product when you purchase it. 【Regarding the Storage Case】 Anticipating the purchase of multiple units, we offer a storage case for sale separately, which can hold up to two items. https://marupeiglb.base.shop/items/84537442 For detailed product information, please check the introduction blog article on the official site (in Japanese). https://marupei.net/2023/06/30/12815/ 【Specifications】 Configuration: TATAMI CARBON TABLE: 1 piece Size When in Use: 310mm × 158mm × 65mm (Tabletop Size: 300mm × 148mm) Folded Size: 310mm × 158mm × 12mm Table Color: Carbon Matte Black Weight: Approx. 190g Materials: Tabletop / Dry Carbon | Corner Pieces / Nylon (Glass Fiber Reinforced) | Legs / Pure Titanium (Anodized) | Magnets / Neodymium | Screws & Nuts / Stainless Steel Load Capacity: 6kg Country of Manufacture: Made in Japan (Only the dry carbon plate material is made in China) 【Caution】 Applying a strong impact on the tabletop with sharp objects may cause it to crack. It cannot be used with direct placement of nature stoves, charcoal, etc. The design, specifications, and price of the product are subject to change without notice.

This lightweight mini table, weighing approximately 210g, excels at outdoor events such as mountain climbing, hiking, solo camping, and festivals. No complex assembly is required; simply pull it out from your backpack and flip up the folded legs with ease. While it's compact enough to hold just a solo cooker and a single burner side by side, its design allows for multiple tables to be connected both vertically and horizontally, offering endless possibilities for expansion. The tabletop is designed to withstand the radiant heat from single burners, alcohol stoves, and solid fuels. For the crucial legs that support the entire load, durable and lightweight titanium has been chosen, ensuring both strength and portability. [Please Note] Placing cookware such as skillets or Dutch ovens directly on the tabletop immediately after heating can cause discoloration or scorching. Please use a trivet or similar protection. You cannot place charcoal or wood stoves on it. To prevent deformation or damage, do not forcefully pack it into a backpack. Ensure it is placed in a position where it is less likely to be compressed during packing and transport. Do not lift or move the table while it is connected. [About Production and Handling Marks] TATAMI is handcrafted in-house from the cutting of the tabletop material to finishing, assembly, operational adjustment and verification, and final inspection, with the exception of individual parts (corner parts, titanium legs). As a small garage manufacturer, mass production is not feasible. We pay close attention to the production process, but due to the nature of the manufacturing, handling marks and dirt are inevitable. Please be aware that there might be slight stains, scratches, and dents remaining on the product when you purchase it. [Regarding the Storage Case] Anticipating the purchase of multiple units, we offer a storage case for sale separately, which can hold up to two items. [Specifications] Size When in Use: 310mm × 158mm × 65mm Folded Size: 310mm × 158mm × 12mm Table Color: White Weight: Approx. 210g Materials: Table: Aluminum Composite Panel | Corner Pieces: Nylon (Glass Fiber Reinforced) | Legs: Titanium | Magnets: Neodymium | Screws & Nuts: Stainless Steel Load Capacity: 3kg Country of Manufacture: Made in Japan *The design, specifications, and price of the product are subject to change without notice.

This is a storage case designed specifically for the TATAMI TABLE. It utilizes the built-in magnets in the TATAMI TABLE to store two tables attached together. [Lightweight and Durable Tyvek Material] This product uses Tyvek® material made by DuPont™, which, despite feeling similar to washi (Japanese paper), combines the characteristics of being strong, lightweight, and resistant to water. ※"DuPont™" and "Tyvek®" are registered trademarks of DuPont in the United States. [Cord Lock] A cord lock that does not use a metal spring is adopted. Combined with the highly waterproof Tyvek material, this eliminates the need to worry about damage from rust or other forms of corrosion, and contributes slightly to the overall lightness of the item. [Cord] The drawstring used to tighten the sack's opening is made from reflective paracord (approximately 2.4mm in diameter). *The color and type of paracord may change depending on the production lot. [Please Note] Due to being handmade, there may be variations in sewing and finishing, with a possible discrepancy of about 10mm. The sewn parts are not as strong as the fabric surface, so please do not forcibly stretch or push items into the sack. Be careful not to bring the sack close to or in contact with open flames. It can melt, causing holes or burns. Prolonged exposure to sunlight or ultraviolet light may cause yellowing. Only the sack described in the mentioned configuration is included in the product. [Specifications] Configuration: TATAMI BUKURO (Tatami Bag): 1 piece Size: 180mm × 390mm (Due to being handmade, sizes may vary) Color: White Weight: Approx. 11g Materials: High-Density Polyethylene (Tyvek), Cord: Nylon, Cord Lock: ABS Resin Country of Manufacture: Made in Japan *The design, specifications, and price of the product are subject to change without notice.

This is a small stuff sack with a gusset that can hold small items. It perfectly fits the Snowpeak titanium mug 300. [Lightweight and Durable DCF Material] The sack is made from DCF (Dyneema Composite Fabric, formerly known as Cuben Fiber), a material known for its exceptional lightness and strength. It is primarily made from ultra-high-molecular-weight polyethylene (UHMWPE), processed into a thin film. This material is used in various applications due to its durability and lightweight properties, including sails for yachts, high-performance backpacks, tents, and even bulletproof vests. [Cord and Cord Lock] A corrosion-resistant cord lock that does not use a metal spring is employed, complementing the waterproof qualities of the DCF material and contributing to slight weight reduction. The drawstring used to tighten the sack's opening is a reflective red paracord, chosen for its easy association with fire-related gear. [Please Note] - Due to being handmade, there may be variations in sewing and finishing, with potential discrepancies of about 10mm or deformations. - The seams are not treated, so the sack is not waterproof. - The strength of the sewn parts is not as high as that of the fabric surface, so please do not forcefully stretch or push items into the sack. - Be careful not to bring the sack close to or in contact with fire. It can melt, causing holes or burns. - Only the sack described in the following configuration is included in the product. - The color displayed on your monitor may differ from the actual color of the item. Please be aware of this before purchasing. [Specifications] Size: 65mm × 65mm × 125mm Color: Black Weight: Approx. 5g Materials: DCF (Dyneema Composite Fabric), Cord: Nylon, Cord Lock: ABS Resin Country of Manufacture: Made in Japan *The design, specifications, and price of the product are subject to change without notice. *Please read the "SHOPPING GUIDE" before placing your order (in Japanese). https://marupei.shopselect.net/p/00003

I developed this part wanting a table that could easily adjust in height and angle to match the height of hammocks used outdoors. This is an Arca-Swiss compatible tripod mounting plate that can transform a camera tripod into a table. (Note: This product cannot be used to mount a camera.) By using the included screws to attach items like wooden boards, cutting boards, or trays, you can easily create a tripod table that is adjustable in both height and angle, utilizing everyday objects around you. Regardless of ground slopes or unevenness, you can freely adjust the table's height and angle, allowing you to quickly and easily create a level surface even in outdoor settings where flat areas are scarce. By designing the tripod connection part to be Arca-Swiss compatible, it allows for a larger contact area with the tripod, enabling quick and secure fixation to Arca-Swiss compatible heads and clamps. It also incorporates a ¼" tripod mounting screw for attaching general cameras, making it compatible with traditional screw-in type tripods as well as tripods that use their own quick shoe systems. By blending glass fibers with polycarbonate material, high strength and lightness are achieved. Even when firmly tightened with an Arca-Swiss compatible clamp, it will not crack, allowing you to use it with confidence. Slots for belts up to 25mm wide are provided on all four sides. Depending on your ideas, these can be used for a variety of purposes, such as straps for carrying or bands to secure items in place. Conditions for the table to be attached: - It must have dimensions within 450mm in length and 350mm in width, sufficient strength as a table, and a flat surface of at least 90mm x 70mm at the center of the area where it will be attached. - Please choose a material that can be securely fixed with four tapping screws. Due to the ease of processing, 9 to 16mm Lauan or China plywood is recommended. - There might be instances where materials with a thickness of less than 9mm, or materials that are too soft for screws to properly take hold, cannot be attached. - Materials with a thickness of 6mm or less cannot be attached. - We recommend using a sturdy tripod that allows for the removal and replacement of the head, with a load capacity of over 10kg (15kg or more recommended). [Specifications] Size: 80mm × 60mm × 11mm Weight: 28g Accessories: M3 × L12 Stainless Steel Pan Tapping Screws: 4 pieces Material: Polycarbonate (Glass Fiber Reinforced) Load Capacity: Within 1/5 of the load capacity of the tripod head used Country of Manufacture: Made in Japan *The design, specifications, and price of the product are subject to change without notice.

I designed an ultra-thin, compact, foldable stove that can be carried inside a Trangia messtin. Optimized for cooking with solid fuel or using an alcohol stove in the messtin, the Delta Stove is a marupeinet original gear designed to enhance and simplify your camping experience. Aiming for a windscreen panel that shields the flame from side winds when using solid fuel or an alcohol stove, it is designed using flat plates without protrusions for easy disassembly and thorough cleaning. Additionally, it features a unique locking mechanism designed for safety, preventing unintentional disassembly even if it deforms under high heat. The cut edges have been optimally polished to remove dangerous burrs, ensuring both a beautiful design and high quality, in keeping with Japanese manufacturing standards. You can set the separately sold "T3" for the VARGO Hexagon Wood Stove, allowing stable use with cookers of various diameters, from small titanium mugs to larger pots. Additionally, by changing the position where it is set, you can adjust the height of the T3 to three different levels. [Specifications] Configuration: Side panels: 3 pieces Base panel: 1 piece Accessories:Case Size: Assembled: 152mm x 133mm x 80mm Disassembled: 152mm x 83mm x 2mm Weight: 138g (per set, case not included) Material: Main body: 18-8 stainless steel Case: Polypropylene Country of Manufacture: Made in Japan *The design, specifications, and price of the product are subject to change without notice.

The VARGO Hexagon Wood Stove is a popular camping gear among solo campers, but it is difficult to use with small cookers such as Sierra cups and mugs because they are unstable when placed on it. Moreover, the thinness of the plates makes it wobbly and insecure. To address these complaints, I designed an original custom titanium grate that extends the pot support area. By setting it on the marupeinet Delta Stove or the VARGO Hexagon Wood Stove, small cookers that were difficult to stabilize due to poor seating can now be placed stably. It also reduces wobbling in the pot support area, significantly increasing the overall rigidity of the stove, and remarkably reducing deformation and instability. It is compact enough to be stored in the storage bag that comes with the VARGO Hexagon Wood Stove. By changing the angle at which it is set, it can lock the door of the VARGO Hexagon Wood Stove to prevent it from unintentionally opening, or conversely, keep it open by fixing it in an open position, adding functions not available with the VARGO Hexagon Wood Stove alone. Even with the T3 set, you can insert and remove the flame adjuster and extinguisher lid of the trangia alcohol burner TR-B25. The stability when placing light pans or pots with a diameter of around 20cm, not limited to small cookers, is improved. You can enjoy the unique taste of titanium material, which changes to a beautiful bluish-purple color when heated. [Specifications] Configuration: 3 pieces per set Size: 146mm × 33mm (per piece) Weight: 31g (per set) Material: Titanium Country of Manufacture: Made in Japan *The design, specifications, and price of the product are subject to change without notice.